Watch the video
Before you install....
We know it looks easy, but trust us, it's worth watching. Grab your installing partner and have them watch it with you :)
Fresh paint
Please don't install a Think Board on freshly painted walls. Paint needs about 30 days to stop releasing gas/fumes.
Recommended Surfaces
Not sure if your Think Board will install on a certain surface? Please check out our gallery of recommended surfaces here.
Review, Replace or Refund
Our company heavily depends on Amazon reviews. If you love it or like it, please leave us a review. It would mean the world to us.
Watch the video
We know it looks easy, but trust us, it's worth watching. Grab your installing partner and have them watch it with you :)
Fresh paint
Please don't install a Think Board on freshly painted walls. Paint needs about 30 days to stop releasing gas/fumes.
Recommended Surfaces
Not sure if your Think Board will install on a certain surface? Please check out our gallery of recommended surfaces here.
Review, Replace or Refund
Our company heavily depends on Amazon reviews. If you love your Think Board, please leave us a review. It would mean the world to us.
Wall Install Video
"Wet Install" Video
(Special Note: Clear Think Boards on glass/stainless steel may look foggy for 2-3 days until the moisture from the wet-install dries.
Whiteboard/Chalkboard Resurfacing Video
Magnetic Resurfacing Video
Table Resurfacing Video
Cork Resurfacing Video
Setting Up Your Think Board X
Installing On All Other Surfaces
Step 1: FIND YOUR SPACE
Think Boards adhere well to smooth, indoor surfaces.
Step 2: GET CLEAN
You like clean sheets, Think Board likes clean walls. Use a warm damp cloth to wipe down the surface and let it dry completely.
Step 3: GET HELP
No need to call 911, just get a friend. If you're putting up smaller Think Board products, then going solo is OK.
Step 4: GET IT ON
Peel your Think Board off the backing and hover it over the wall. (If you have a larger Think Board, have your friend hold 1 corner) Starting in the center, use your Magic Cloth (or plastic squeegee) to smooth your Think Board onto the wall. Go slow and you'll do just fine!
Step 5: SHOW OFF YOUR THINK BOARD WITH PRIDE
Tag us on IG, Tweet at us, or hey, shoot us an email :) Share your excitement with the world! @thinkboard
Important Tips!
- Do NOT use Expo Bold on our non-Premium products - the chemicals are too strong for Think Board.
- Clean with your magic cloth. If markings are not coming off, a little water should do the trick.
- Don't use any cleaning spray or old school foam erasers. Those damage all whiteboards... so don't use the here either :)
- If a permanent marker is used by accident, hair spray or rubbing alcohol takes it off!
- Magic Erasers and hairspray remove any marks on the walls!
Recommended Surfaces:
- Smooth Walls
- Painted Drywall
- Wooden Desks
- Doors
- Glass (please see "Wet Install" video)
- Metal (please see "Wet Install" video)
- Inside, temperature controlled environments
- See more here
NOT Recommended Surfaces:
- Textured Walls
- Unpainted drywall
- Brick
- Cinder Block
- Porous, textured paneling
- Outside, non-temperature controlled environments
Step 1: FIND YOUR SPACE
Think Boards adhere well to smooth, indoor surfaces.
Step 2: GET CLEAN
You like clean sheets, Think Board likes clean walls. Use a warm damp cloth to wipe down the surface and let it dry completely.
Step 3: GET HELP
No need to call 911, just get a friend. If you're putting up smaller Think Board products, then going solo is OK.
Step 4: GET IT ON
Peel your Think Board off the backing and hover it over the wall. (If you have a larger Think Board, have your friend hold 1 corner) Starting in the center, use your Magic Cloth (or plastic squeegee) to smooth your Think Board onto the wall. Go slow and you'll do just fine!
Step 5: SHOW OFF YOUR THINK BOARD WITH PRIDE
Tag us on IG, Tweet at us, or hey, shoot us an email :) Share your excitement with the world! @thinkboard
Important Tips!
- Do NOT use Expo Bold on our non-Premium products - the chemicals are too strong for Think Board.
- Clean with your magic cloth. If markings are not coming off, a little water should do the trick.
- Don't use any cleaning spray or old school foam erasers. Those damage all whiteboards... so don't use those here either :)
- If a permanent marker is used by accident, hair spray or rubbing alcohol takes it off!
- Magic Erasers and hairspray remove any marks on the walls!
Recommended Surfaces:
- Smooth Walls
- Painted Drywall
- Wooden Desks
- Doors
- Glass (please see "Wet Install" video)
- Metal (please see "Wet Install" video)
- Inside, temperature controlled environments
- See more here
NOT Recommended Surfaces:
- Textured Walls
- Unpainted drywall
- Brick
- Cinder Block
- Porous, textured paneling
- Outside, non-temperature controlled environments
Bought on Amazon?
Bought on Amazon?
Bought on our site?
Questions? Live chat us below ⬇️
or email us at hello@think-board.com